Select Page

What you should know about CNC router maintenance

What you should know about CNC router maintenance

When properly maintained in accordance with the guidelines provided by the manufacturer or supplier, a CNC router will function continuously to its full potential for many years. All too frequently, the cause of downtime has nothing to do with the design and construction of the router but everything to do with how it is maintained. Noel Archie, Product Manager at AXYZ International’s parent company in Canada, provides some useful hints as to what form this maintenance should take and how it should be implemented.

Murphy’s Law says that anything that can go wrong will go wrong, usually at the worst possible moment. This is especially true when it comes to equipment failing. However, by conscientiously following the recommended maintenance programme your CNC router should avoid becoming a problem.

It is also important to not cut corners with your maintenance in order to speed up production or save on manpower, as this will undoubtedly end up being a false economy.

It should be noted that for most CNC routers, maintenance is a relatively short process, and thanks to the construction of the machines should only take a few minutes of the operator’s time. The technology incorporates automated logs that provide machine updates on daily activity and remedial measures for any defect detected. This will reduce the possibility of any unexpected downtime, particularly during a critical run.


cnc router being maintained

A recommended maintenance schedule

Many of the more advanced CNC routers include an entire maintenance log covering daily, weekly and monthly inspections. Contingent upon the type and make of router, maintenance schedules tend to vary but the following five guidelines apply to all machines:

Cleanliness: Routers invariably operate in a dusty environment and it does not take long for bearings and controls to become polluted and this is a sure recipe for operating problems if not rectified on a daily basis. Manufacturers and suppliers recommend hand-sweeping of the router, while an air gun can be used to blow debris away from the bearings. Another fairly standard recommendation is to lower the air pressure during the cleaning process.

Change filters: If this sounds like an instruction found in an automobile manual there is a reason for the similarity. Just as clogged filters reduce engine efficiency, the same applies to a router’s controller, vacuum pumps and air lines. The frequency with which filters are replaced will vary, depending on the type of material being processed and environmental factors like the presence of dust and dirt. There is no standardised maintenance protocol but as a rule of thumb filters should be checked weekly and replaced as considered necessary.

Lubrication: This is a fairly basic consideration that can sometimes be overlooked. Generally, routers do not require extensive lubrication but as with all production machinery breakdowns are inevitable if adequate lubrication is not carried out. An important consideration for router owners is that if it is found that a machine malfunction was caused by a failure to lubricate sufficiently the manufacturer’s warranty would be voided. Bearings, pumps, router spindles and knives need regular lubrication but the frequency with which this is carried out will again be influenced by the type and make of machine, the extent of its use and the work environment in which it operates.

Air supply cleaning: Most routers operate using air that has to be clean, dry and maintained at a steady pressure exceeding 80psi or six barometric. Damage to the router is likely in the short term if air pressure is not checked regularly and maintained at the recommended level.

Safe and appropriate electrical power: The caveat for electrically-powered machines applies equally to CNC routers, with the power connected safely as required by local regulations. Router failure is likely to occur in cases of poor electrical grounding, low voltage or insufficient capacity. As with all computer-operated machinery, power spikes will cause serious damage.

Daily and weekly maintenance protocols invariably come with every CNC router. They include times for logging operation hours, general cleaning, air pressure readings and lubrication. Monthly inspection protocols include greasing of the racks, pinions and bearings, repair or replacement of the vacuum table gasket should this be necessary and cleaning of all filters. In addition, bi-annual maintenance protocols include replacement of all filters, vacuum performance testing and inspection and tightening of timing belts and transmissions.

In conclusion, the best way to ensure optimal router performance is to rigidly follow the recommended maintenance guidelines. Failure to do so will result in premature wear and tear and owners left with an expensive but non-functioning piece of equipment as well as a drain on their balance sheets. Proper maintenance devoid of short cuts is imperative because routers are invariably an essential component of many manufacturing companies.

For further information, visit or telephone 01952 291600

Leave a Reply

The latest Projects, Features & News

Discover the latest projects, industry news and new products for the UK sign and graphics industry.

Recent Tweets